Stock Tank Pool Heating Systems

1. Heater of Choice
2. FREE DELIVERY WITH POOL PURCHASE. If you choose to install a heater at a later time, a delivery charge of 1.75 per mile will be collected upon installation.
3. Heater Installation
   

Please Note:
Electrical requirements vary by heater type. Please confirm with a licensed electrician that your electrical panel can support your selected heater prior to purchase.

The following is not included but required by customer:

FOR PROPANE OR GAS HEATING UNITS

• A treated 4X4 post upon which your propane or gas heater will hang. This post must be installed 6-10ft from your filter. If you choose to have your post further, keep in mind that 10ft is the max distance and an additional fee will be added for additional material and parts.
• TWO 110V GFCI outlets (for filter and heater)
• A full propane tank must be on site ready to use. Propane tank is NOT included.
  

GAS HEATING UNIT:

• 3/4" gas line needed 6-10ft away from your pool.
• Gas connection to heater must be installed by a plumber

FOR 110V HEATER & CHILLER UNIT

• TWO 110V GFCI outlets (for filter and heater)
• Heater must be grounded by an electrician
• Qty 6 - 4x4 pavers
  

FOR 220V UNITS

• ALL 220V Heaters/ Chillers must be hardwired and properly grounded by an electrician AFTER installation. These units are installed inline with the filtration system, making the final electrical connection quick and straightforward.
• 220V Heater & Chiller requires Qty6 4x4 pavers
  
• 220V Raypak heaters arrives on a wood platform.
  

• Propane Heater (Best for 6-8ft Pools)
  110V/ 20L/ 5.28gpm/ 136,000 BTU Camplux Outdoor Heater
  4x4 post must be installed 6-10ft from your filter. Propane tank is not included.
  Ready to use after Installation.
  
  
  
• Heater & Chiller (Best for 6-8ft Pools)
  110V/ 35k BTU/
  Heating: 47 - 104degrees/ Cooling: 47 - 83degrees
  Ready to use after install.
  
  

• Heater (heats only & small footprint)
  220V/ 11 Kw/ 37K BTU Raypak Pool and Spa Heater
  **This unit requires hardwiring and grounding by an electrician after installation. Units are installed inline with the filtration system, ready for your electrician to complete the hardwiring.
  
  

• Heater & Chiller
  220V/ 75K BTU/
  Heating: 47-104degrees/ Cooling: 47-83degrees
  **This unit requires hardwiring and grounding by an electrician after installation. Units are installed inline with the filtration system, ready for your electrician to complete the hardwiring.